Gr5 Titanium Alloy Foil

Lightweight and extremely durable material.
Corrosion-resistant for long-term use.
High strength-to-weight ratio for flexibility.
Excellent fatigue resistance for durability.
Customizable to suit needs.
All products have passed ISO9001:2015, ISO13485:2016, EU CE safety certification
Product Description

Gr5 Titanium Alloy Foil - High-Strength Aerospace & Medical Grade Material for Critical Applications

Baoji INT Medical Titanium Co., Ltd. manufactures precision-engineered Gr5 Titanium Alloy Foil conforming to ASTM B265 and AMS 4911 standards. Our Ti-6Al-4V foil delivers tensile strength of 895–1000 MPa and yield strength ≥828 MPa—approximately three times stronger than commercially pure titanium grades. With thickness capabilities down to 0.01mm and certified under ISO9001:2015, ISO13485:2016, and EU CE standards, our foil serves aerospace honeycomb structures, medical implant casings, and high-end audio diaphragms. Backed by over 30 years of titanium processing expertise since 2003, we provide customized solutions for applications demanding exceptional strength-to-weight ratios, fatigue resistance up to 400°C, and long-term corrosion immunity in demanding biochemical and industrial environments.

Gr5 Titanium Alloy Foil

Technical Specifications & Material Properties

Our product exhibits superior mechanical characteristics compared to commercially pure titanium alternatives. The Ti-6Al-4V composition provides structural advantages in weight-critical applications.

Property

Value

Standard

Tensile Strength

895–1000 MPa

ASTM B265

Yield Strength

≥828 MPa

ASTM B265

Composition

Ti-6Al-4V (6% Al, 4% V)

AMS 4911

Thickness Range

0.01mm – 0.30mm

Customizable

Thermal Conductivity

6.7 W/m·K

—

Maximum Service Temperature

350°C–400°C

—

Density

4.43 g/cm³

—

Elastic Modulus

113.8 GPa

—

The spontaneous creation of the TiO2 oxide layer guarantees resistance to seawater, to industrial chemicals and to air corrosion. In our manufacturing process we use vacuum annealing cycles with tight control of hydrogen content below 150 ppm to avoid embrittlement.

Aerospace & Defense Applications

The product is used as the preferred material for the structural honeycombs of aircraft and thermal protection systems. This high stiffness to mass ratio allows it to endure extreme cyclic temperature fluctuations and aerodynamic loads while decreasing airframe weight by up to 45% compared to ferrous alternatives.

The foil fatigue resistance is important for heat shields which undergo fast thermal cycling during atmospheric re-entry. Our material is specified by manufacturers for applications where failure is catastrophic. It has a low thermal conductivity of 6.7 W/m·K which provides effective thermal barrier qualities in engine bay applications.

Medical Device Integration

Your neurostimulator and pacemaker designs benefit from our precision-rolled foil for the production of hermetic enclosures. The biocompatible Ti-6Al-4V composition fulfils the strict standards for implantable devices and allows for miniaturisation of the device with thinner wall sections.

Batch traceability for regulatory filings is guarantyd by our ISO13485:2016 certified manufacturing. The material's corrosion resilience in biological settings relieves concerns of degradation after decades of implantation. Gr5 delivers three times the strength of commercially pure titanium choices, enabling you to decrease device profiles without sacrificing structural integrity.

High-Performance Audio Engineering

Our product is used by makers of audiophile grade speakers to make tweeter diaphragms. High stiffness-to-mass ratio results in the breakup frequency exceeding 20 kHz, resulting in crisp high frequency response with minimum distortion.

Our material is used by pro audio engineers who prefer it over aluminium or cloth alternatives for its predictable acoustic qualities. The inherent spring-back action of Gr5 foil gives elastic recovery during acoustic excursions, keeping diaphragm geometry intact under high sound pressure levels. The work-hardening properties of the alloy need precise die design in the stamping operations.

Processing & Fabrication Considerations

Working with Gr5 Titanium Alloy Foil requires specialized manufacturing knowledge. Unlike soft commercially pure titanium, this alpha-beta alloy exhibits significant springback and lower ductility during forming operations.

Complex geometries stamped at cold temperatures generally need large bend radii – minimum 4T – to avoid cracking. For complex designs, most fabricators utilise hot sizing or heated shaping processes in the 650°C-850°C temperature range. Our technical team may recommend forming parameters for your unique geometry.

Atmospheric control is essential in welding operations. We propose electron beam welding or TIG welding in vacuum or inert gas chambers. Not enough shielding leads to immediate oxidation ruining mechanical characteristics. Our material is weldable and is suitable for hermetic seal applications when the correct methods are utilised.

Quality Assurance & Supply Capabilities

Full testing, including tensile testing, chemical composition analysis and surface quality inspection, is performed on every production batch. Our state-of-the-art precision processing technologies encompass several vacuum annealing cycles required for rolling Ti-6Al-4V down to foil gauges.

We stock a consistent inventory of conventional thicknesses, but also offer custom requirements for particular purposes. Run to run consistency of material attributes is ensured through quality management systems certified to ISO9001:2015 and ISO13485:2016. Available in bright annealed, pickled or polished surface finish as per your friction and adhesion needs.

Product Technology and Production Process

Hot rolling and forging techniques that enhance the mechanical properties, ensuring superior strength and toughness.
Ultrasonic testing to detect flaws and ensure 100% reliability.
Strict quality control at every stage of production, meeting and exceeding international medical standards like ISO9001:2015 and ISO13485:2016.
Titanium raw materials Smelting forging cutting
extrusion Straightening Processing Finished Product

Industries Catered

Our products are widely used in medical, automotive, aerospace, chemical, scientific and technological manufacturing and electronic information industries.

Titanium for the medical industry Titanium for the automotive industry Titanium for the aerospace industry Titanium for the chemical industry Titanium for the technology manufacturing industry Titanium for the electronics industry

Our Factory - A Legacy of Excellence

Founded in 2003 by titanium industry expert Mr. Zhan Wenge, Baoji INT Medical Titanium Co., Ltd. has grown into a benchmark enterprise in the R&D and production of medical titanium materials. With more than 30 years of experience, INT is deeply invested in the development of high-quality titanium for the medical sector. We provide a full range of titanium products, including pure titanium, Ti6Al4V ELI titanium, and custom titanium alloy forgings.

Inductance meter Polishing Machine Chemical milling machine Laser cutting machine
Precision forging Three coordinates Vacuum annealing furnace Quality inspection equipment

Packaging and Transportation

package 1 package 2 package 3

Why Choose Us?

Choosing Baoji INT Medical Titanium Co., Ltd. means partnering with a trusted leader in the medical titanium industry.

Here’s why:

Proven Expertise: Over 30 years of experience in medical titanium production.
Advanced Technology: State-of-the-art production lines and equipment.
International Certifications: ISO9001:2015, ISO13485:2016, and EU CE certifications.
Comprehensive Support: We provide ongoing technical support, ensuring our products fit seamlessly into your manufacturing process.
Customer-Centric Approach: Committed to delivering high-quality products on time, every time.
For inquiries or orders, please contact us at export@tiint.com. We look forward to partnering with you for your medical titanium needs.

ceitificates

certificate

our history

FAQ

Q: What distinguishes Gr5 from Gr2 Titanium Foil?

A: Gr5 delivers approximately three times the tensile strength of Gr2 through its Ti-6Al-4V alloying. While Gr2 offers superior cold formability, Gr5 provides load-bearing capacity and fatigue resistance for structural applications. The trade-off involves increased processing complexity and springback during forming.

Q: Can you cold form the product?

A: Cold forming is challenging due to work-hardening and springback characteristics. Complex shapes require hot forming between 650°C–850°C or generous bend radii exceeding 4T for cold operations. Our engineering team can recommend forming parameters for your specific design.

Q: What causes the higher cost compared to commercially pure foil?

A: The Ti-6Al-4V alloy work-hardens rapidly during processing. Achieving foil gauges requires numerous rolling passes with intermediate vacuum annealing cycles—significantly more complex than soft CP titanium production. This processing intensity drives material costs higher.

Q: What temperature limits apply to Gr5 foil applications?

A: Our foil maintains mechanical properties reliably up to 350°C–400°C. Beyond 430°C, surface oxidation accelerates and strength begins degrading, though it still outperforms aluminum and standard steels in this temperature range.

Q: Does hydrogen embrittlement affect this alloy?

A: Like all titanium alloys, hydrogen pickup can occur. Our production includes vacuum annealing and strict hydrogen monitoring to maintain content below 150 ppm, minimizing embrittlement risk throughout the material's service life.

Contact Us for Technical Consultation

Reach our export team at export@tiint.com for Gr5 Titanium Alloy Foil specification discussions, sample requests, and quotations tailored to your project requirements.

Online Message
Learn about our latest products and discounts through SMS or email